(Answer) (Category) SCO(Caldera) UnixWare 7/OpenUNIX 8 FAQ : (Category) General Information :
How do I document my UW 7 System? (HW, SW...)
There are a number of ways to view and/or create a text file of your UnixWare 7 hardware configuration, but there's no dmesg. 

   1. In November 2000, Sco released TLS712, sysinfo.  Sysinfo(1M) gives the
      most comprehensive way to list your entire Unixware setup, in both
      text or html, and it includes these other commands, among others:

      A. The resmgr(1M) command outputs your hardware configuration (DCU)
         information:
                                    /sbin/resmgr > /tmp/hw

      B. The prtconf(1M) command prints system memory and peripheral
         configuration.
                                    /usr/sbin/prtconf

      C. The sdiconfig(1M) command queries the storage device interface
         subsystem to determine which disk, tape and scsi controllers
         are present.  To list the controllers and the attached devices,
         use the command:
                                    /sbin/sdiconfig  -l

      D.  This is the location of the X tool.  Which sticks an html file in /tmp

                                    /usr/lib/X11/testtools/z35Sysinfo



gerberb@zenez.com

[Append to This Answer]
Previous: (Answer) What are my biggest problems with Uw7?
Next: (Answer) How do I get my IDE cdrom recognized during ISL?
This document is: http://www.zenez.com/cgi-bin/ou8faq.org/faq?file=248
[Search] [Appearance]
This is a Faq-O-Matic 2.721.